Description
Geya Staircase Switch is a kind of delay off time relay. Geya Staircase Switch can be used for delayed switching off lights in the corridors, entrances, stairways, halls or for the delayed finish of fans (WC, bathroom, etc.).
Geya Staircase Switch is a smart switch to control your lamps, and don’t need using two 2-way switches anymore.
Using Geya Staircase Switch can easily make Controlling a Lamp from 2 Places by 2-Way Switches come true. Geya Staircase Switch will close the lamps automatically.
Applications
It is used for delayed switching off lights in the corridors, entrances, stairways,
halls or for delayed finish of fans (WC, bathroom, etc.).
Function Features
- Operating system switch:
ON – output is constantly ON.
AUTO – timing according to adjusting by potentiometer in range 0.5 – 20 min
OFF – output is constantly OFF.
- Voltage range: AC 230 V, clamp terminals.
- Relay status is indicated by LED.
- 1-MODULE, DIN rail mounting.
Technical parameters | GRT8-LS |
Function | delay off reacting to contact switching |
Supply terminals | L-N |
Voltage range | AC 230V(50-60Hz) |
Power input | AC max.6VA/1.3W |
Supply voltage tolerance | -15%;+10% |
Supply indication | green LED |
Time Ranges | AUTO:0.5-20min ON OFF |
Time setting | potentiometer |
Time deviation | 10%-mechanical setting |
Repeat accuracy | 0.2%-set value stability |
Minimum power time | 200ms |
Glow tubes connections | Yes(N-3 or L-3) |
Max. amount of glow lamps | 230V,max.75pcs(Measured with glow lamp 0.68mA/230V AC) |
Temperature coefficient | 0.05%/℃,at=20℃(0.05%℉,at=68℉) |
Output | 1×SPDT |
Current rating | 16A(AC1) |
Switching voltage | 250VAC/24VDC |
Min. breaking capacity DC | 500mW |
Output indication | red LED |
Mechanical life | 1×107 |
Electrical life(AC1) | 1×105 |
Reset time | max.200ms |
Operating temperature | -20℃ to+55℃(-4℉to131℉) |
Storage temperature | -35℃ to+75℃(-22℉to158℉) |
Mounting/DIN rail | Din rail EN/IEC 60715 |
Protection degree | IP40 for front panel/IP20 terminals |
Operating position | any |
Overvoltage category | III. |
Pollution degree | 2 |
Max.cable size(mm 2) | solid wire max.1×2.5or 2×1.5/with sleeve max.1×2.5(AWG 12) |
Tightening torque | 0.8Nm |
Dimensions | 90×18×64mm |
Weight | 61g |
Standards | EN61812-1,IEC 60669-2-3,IEC60947-5-1 |