Name: SAFE-MULTI E-stop Safety Selay - GEYA Electrical Equipment Supply
SKU: SAFE-MULTI

Description

SAFE-MULTI is a safety relay for emergency stop, safety door and light curtain monitoring up to SIL 3 and Cat. 4, PL e in accordance with EN 62061 / EN 61508 and EN ISO 13849, certified by TÜV Rheinland, 1- or 2-channel operation with or without cross circuit detection, automatic and manual start, 7 safe relay contacts, nominal input voltage: 24 V AC/DC, max. switching capacity 250 V AC / 6 A, pluggable screw terminal blocks

Standards and Regulations

In Compliance With	EN 60204-1; EN ISO 13849-1; IEC 62061
Rated Impulse Withstand Voltage (control voltage / contacts)	2.5 kV
Dielectric Strength	4 kV
Rated Insulation Voltage	250 V
Degree of Pollution	2
Overvoltage Category	3

Input Data

Nominal Operating Voltage	24 V AC / DC
Input Voltage Range DC	21.6 … 26.4 V
Input Voltage Range AC	21.6 … 26.4 V
Power Consumption (max.)	AC 8.5 VA / DC 4.5 W
Frequency	50 … 60 Hz
Max. length of control line	2 x 1000 m (1.5 mm²), 2 x 500 m (0.75 mm²)
Recovery Time	< 500 ms

Output Data

Safe Contacts (non delayed)	7 NO
Auxiliary Contacts (non delayed)	4 NC
Switching Voltage (max.)	250 V AC
Contact Rating AC (resistive load)	8 A (250 V, 2000 VA)
Contact Rating 230 V AC-15	3 A
Contact Rating DC (resistive load)	8 A (30 V, 240 W)
Contact Rating 24 V DC-13	3 A
Thermal Current per contact	Max. 35 A total (10 mm spacing between devices)
Minimum Contact Load	5 V, 10 mA
External Fuses	10 A gG (NO); 6 A gG (NC)
Switch-on Delay (max.)	< 30 ms
Switch-off Delay (max.)	< 20 ms
Relay Contact Material	AgSnO2
Relay Contact Life (cycles)	1 x 10⁷

Mechanical Data

Wire Width	0.14 … 2.5 mm²
Tightening Moment (min. / max.)	0.5 Nm / 0.6 Nm
Weight (typ.)	314 g
Mounting DIN Rail according EN 60715	TH35

Ambient Condition

Degree of Protection	IP20
Ambient Temperature (operating)	-15 °C … +40 °C
Ambient Temperature (storage/transport)	-15 °C … +85 °C
Operating Altitude (max. above sea level)	< 2000 m