GYPC-C/S EV Charger Controller

Control the communication of the electric vehicle AC charging process complies with IEC 61851 or SAEJ1772 standards.
Conform to DIN EN60715 installation requirements.
The output of the relay is used to connect the AC contactor that switches on/off the load.
The operating status of the EV interface is indicated by three-color LED lights. The controller’s additional functions include a non-contact IC card connection module, DC leakage detection module (RCMU), RS485 communication interface equipment, plug lock device, external emergency stop button, etc.
These functions must be NOTED when ordering


Data sheet

Operation voltage AC230V±10% 50Hz
Output the PWM signal 10A16A20A25A32A63A
Output control AC contactor Passive contacts
Additional function (Optional) l.RCMU leakage monitoring mode (0-20mA/0-200mA)
2.Non-contact IC Card
3.DLB current balance mode
4.Current sensor access mode (DC+12V Output 0-5V)
5.With LCD display
Communication function (optional) 1 way RS485(Modebus-RTU)/RS232
Output auxiliary voltage DC12V/100mADC5V/100mA
Ambient temperature -40°C-+50°C
Humidity 85%
IP degree IP22
Cooling method Natural cooling
Installation method DIN rail standard
Weight 40g


Naming rule




Wring diagram


Download catalog


EV Charger Controller catalog


There are no reviews yet.

Be the first to review “GYPC-C/S EV Charger Controller”

Your email address will not be published.

Shopping cart


No products in the cart.

Continue Shopping