GRT8-S2 Asymmetric Cycler, Best Supplier in China for 10 Years

Description

Function choice is done by an external jumper of terminals S-A1.
Time scale 0.1 s – 100 days devided into 10 time ranges:(0.1 s – 1 s / 1 s – 10 s / 0.1 min – 1 min / 1 min – 10 min / 0.1 hrs – 1 h / 1 hrs – 10 hrs / 0.1 day – 1 day /1 day – 10 days /3 days – 30 days / 10 days – 100 days).
Relay status is indicated by LED.
1-MODULE, DIN rail mounting.

Technical parameters	GRT8-S1	GRT8-S2
Function	Asymmetric cycle time relay
Supply terminals	A1-A2
Voltage range	AC/DC 12-240V(50-60Hz)
Burden	AC 0.09-3VA/DC 0.05-1.7W
Voltage range	AC 230V(50-60Hz)
Power input	AC max.6VA/1.3W		AC max.6VA/1.9W
Supply voltage tolerance	-15%;+10%
Supply indication	green LED
Time Ranges	0.1s-10days
Time setting	potentiometer
Time deviation	10%-mechanical setting
Repeat accuracy	0.2%-set value stability
Temperature coefficient	0.05%/℃,at=20℃(0.05%℉，at=68℉)
Output	1×SPDT		2×SPDT
Current rating	16A(AC1)
Switching voltage	250VAC/24VDC
Min. breaking capacity DC	500mW
Output indication	red LED
Mechanical life	1×107
Electrical life(AC1)	1×105
Reset time	max.200ms
Operating temperature	-20℃ to+55℃（-4℉to131℉）
Storage temperature	-35℃ to+75℃（-22℉to158℉）
Mounting/DIN rail	Din rail EN/IEC 60715
Protection degree	IP40 for front panel/IP20 terminals
Operating position	any
Overvoltage category	III.
Pollution degree	2
Max.cable size(mm 2)	solid wire max.1×2.5or 2×1.5/with sleeve max.1×2.5(AWG 12)
Tightening torque	0.4Nm
Dimensions	90×18×64mm
Weight	1×SPDT:W240-63g,A230-62g
	2×SPDT:W240-83g,A230-82g
Standards	EN 61812-1,IEC6947-5-1